Control Panel; Operation Of Control Panel - NOBOCOOL NC-42CP User Manual

CONTROL PANEL

A. ON/OFF button.
B. MODE button. to select modes of cooling / dry / fan.
C. FAN SPEED button, to select fan speed of High / Med / Low / Auto.
D. SWING button, to switch on/off left/right auto swing function.
E. TIMER button.
F. INCREASE button, to increase temperature / time.
G. DECREASE button, to decrease temperature / time.
H. TIMER INDICATOR LIGHT, lights up and keeps flashing to indicate the timer is in operation.
I. LCD DISPLAY, displays set temperature, timer hours or room temperature.
L / M / N / O. FAN SPEED LIGHTS of High / Med / Low / Auto.
P. COMPRESSOR OPERATING LIGHT, illuminated when compressor is operating.
Q. FAN MODE LIGHT, illuminated when in FAN mode.
R. DRY MODE LIGHT, illuminated when in DRY mode.
S. COOLING MODE LIGHT, illuminated when in COOLING mode.

OPERATION OF CONTROL PANEL

The operating ranges for cooling and dehumidifying are 18°C - 32°C.
If the appliance is turned off during cooling or dry operation and restarted immediately, the unit will wait
at least 3 minutes before restarting the compressor.
POWER SUPPLY
Do not connect the portable air conditioner to a power supply outlet which is also being used for other
electrical appliances.
Insert the power plug securely into the power supply outlet and turn power on. The air conditioner will
beep after 2 seconds. Press the on/off button on the display panel (or remote) to start air conditioner.
ACCESSORIES
An accessory, in the form of two suction cups and a connecting string, has been included to help store the remote
control. To use this accessory, attach one suction cup to the remote control and the other to a conveniently located
surface. Best results are achieved by wetting the suction cup before securing it to a hard, flat surface.
9 NOBOCOOL NC-42CP/C