Table of Contents
Advertisement
Remove the packaging
Remove the packaging reinforcement underneath the product by tiliting the machine and
pulling the extruding ribbon.
Removing the transit safety bolts
The washing machine is fitted with transit safety bolts to avoid any possible damage to the
interior during transportation.
Before using the machine it is imperative that these bolts are removed. Failure to remove these
will result in damage to the machine.
Please keep these transit safety bolts in a safe place to reuse before transporting the machine in
the future.
Never transport the machine without the transportation safety bolts properly fixed in place.
To remove the bolts:
1
Loosen all the bolts with a spanner until they rotate freely ("C").
2
Remove the transit bolts by turning them gently.
3
Fit the bolthole covers (supplied in the bag with the operation manual) into the holes on the rear
panel ("P").
Positioning the machine
Move the machine into position without lifting by the top panel.
Install the machine on a solid and level floor surface, preferably in a corner of the room.
Installation instructions
4
Hide quick links:
Advertisement
Table of Contents
