Table of Contents
Advertisement
Quick Links
®
SPRAYSTATION GEMINI
DO NOT RETURN TO STORE IF THIS PRODUCT HAS BEEN USED
If you have any questions relating to this product please contact
Earlex customer service
TOLL FREE: 888-783-2612
NO DEVUELVA EL PRODUCTO AL ESTABLECIMIENTO SI HA SIDO USADO.
En caso de dudas y preguntas relacionado con el
producto contacte con el servicio Earlex llamando al
OPERATING INSTRUCTION MANUAL
TELÉFONO GRATUITO 888-783-2612
BEFORE USE – PLEASE READ THE MAIN MANUAL AND SAFETY INSTRUCTIONS
NE PAS RETOURNEZ LE PRODUIT AUGASIN SI CE DERNIER A
Please retain for future reference.
DÉJÀ ÉTÉ UTILISÉ.
Si vousdes questions concernant ce
produit merci de contactez le service client d'Earlex au
888-783-2612
Advertisement
Table of Contents
Related Manuals for Earlex SPRAYSTATION GEMINI
Summary of Contents for Earlex SPRAYSTATION GEMINI
- Page 1 BEFORE USE – PLEASE READ THE MAIN MANUAL AND SAFETY INSTRUCTIONS NE PAS RETOURNEZ LE PRODUIT AUGASIN SI CE DERNIER A Please retain for future reference. DÉJÀ ÉTÉ UTILISÉ. Si vousdes questions concernant ce produit merci de contactez le service client d'Earlex au 888-783-2612...
-
Page 2: Important Electrical Information
Important Electrical Information EXTENSION CORDS Your SprayStation Gemini is supplied with a power cord that is 2m long. Make sure your power ® cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will utilize. - Page 3 IMPORTANT INFORMATION Certain coatings may require dilution. (not supplied) 08/12 08/12...
- Page 4 Fig.1 Fig.2...
- Page 5 NO DEVUELVA EL PRODUCTO AL ESTABLECIMIENTO SI HA SIDO USADO. Please retain for future reference. En caso de dudas y preguntas relacionado con el producto contacte con el servicio Earlex llamando al TELÉFONO GRATUITO 888-783-2612 NE PAS RETOURNEZ LE PRODUIT AUGASIN SI CE DERNIER A...
-
Page 6: Parts List
FF0004 Paint Tube FF0029 Paint Outlet Selecting Paint Your SprayStation Gemini can be used with a wide variety of paints, stains and coatings. See below for what paints you can or cannot spray with your ® SprayStation Gemini ® However, some materials cannot be sprayed so please check the recommendation of the paint manufacturer before buying the paint. If a material refers to brush application only, then it usually cannot be sprayed. - Page 7 – is ideal for spraying left to right and for edges top to bottom (Fig.3). Round pattern – is ideal for detailed areas or small objects (Fig.3). Spraying with your SprayStation Gemini is very intuitive and through a little practice you will very quickly become a good sprayer. ®...
-
Page 8: Switch Functionality
Switch functionality Pump HORIZONTAL ROUND VERTICAL Turbine Paint speed dial Paint flow adjuster IMPORTANT: Correct cleaning of this sprayer is essential for successful operation on next use. Please refer to the How to DVD and the cleaning section of your operational manual on how to clean your sprayer. - Page 9 Priming – Direct from the paint tin (or Gemini Bucket) SOLVENT-BASED COATINGS CANNOT BE USED WHEN SPRAYING DIRECT FROM THE TIN. ALWAYS PRIME THE UNIT WITH WATER BEFORE STARTING ANY JOB. ENSURE YOUR PAINT IS AT ROOM TEMPERATURE. ALWAYS DILUTE USING WARM WATER. 1) If the spray gun is not in the docking station, scroll the Paint Flow Adjuster (8) on the back of the Fig.11 gun up to maximum –...
-
Page 10: Spraying Tips
Starting to Spray - Direct from the paint tin (or Gemini Bucket) (Water-based coatings only) Spraying Tips Before starting your project, practice spraying onto waste cardboard – this will ensure that you get some practice and allow you to set the Gemini to the right setting. The flow rate will vary dependant on what you are spraying. - Page 11 Tip: Squeeze and flex the paint tube to remove all the paint from inside the tube. 5. Wipe any excess paint off the Gemini Bucket (25) and head unit with a warm damp cloth. This will >>>ensure your SprayStation Gemini is ready for your next painting project.
- Page 12 Cleaning Instructions - Spray Gun (Fig.25) Unscrew Air Cap Ring (2). ● Remove Air Cap (3). ● Remove Spray Direction Plate (4). ● Using Needle and Fluid Tip Tool - pincer end A (1) remove the Fluid Tip (5). ● Insert Needle and Fluid Tip end B (1) into the inner tube and unscrew the Needle (7) anticlockwise, then pull to release the Needle.
- Page 13 3. Set Paint Flow Adjuster (#8, Fig.25) to any desired setting. 4. Uncoil the Air Hose (15) and attach it to the back of the spray gun and the other end to the SprayStation Gemini . Uncoil the power cable and ®...
-
Page 14: After Use
Fluid Tips and Needles (applies to spraying with the paint pot only) The fluid tip and needle that is supplied with your spray gun is ideal for most applications, however if you want to use you SprayStation Gemini to achieve ®... -
Page 15: Troubleshooting And Faqs
Troubleshooting & FAQ’s - Direct from the paint tin or the paint pot PROBLEM CAUSE ACTION REQUIRED The paint splatters Paint viscosity is too thick Thin as required using appropriate thinners (see thinning instructions) An area inside the spray gun has a degree of blockage Clean gun and filter paint in the container Gun wasn’t correctly cleaned from previous project Clean gun The paint drips or sags on... -
Page 16: Electrical Connection
This product is guaranteed for a period of 24 months against faulty manufacture and materials. It is not guaranteed for industrial or hire purposes. The guarantee does not affect your statutory rights. Earlex Ltd. will accept no responsibility for the use of this product if used for any purposes other than those detailed herein. - Page 17 NOTES...
- Page 18 NOTES...
- Page 19 NOTES...
- Page 20 Earlex Ltd. Tel: +44 (0)1483 454666 Email: enquiries@earlex.co.uk Website: www.earlex.com © Earlex Ltd. 2012 FF0057 11/12...
Need help?
Do you have a question about the SPRAYSTATION GEMINI and is the answer not in the manual?
Questions and answers