Table of Contents
Advertisement
INSTRUCTIONS FOR USE
COMPONENT OPERATION
PROGRAMMING THE OVEN
Setting the Clock.
Once the power has been connected,
the display 0.00 and the Auto indicator
will flash alternately.
Press both keys (1) and (2) at the
same time and release.
Within 4 seconds, set the clock by
pressing either button (1) or (2) until
the correct time is set.
The oven is now in manual mode and the manual indicator
displayed. The oven can now be used without any further programming.
Setting End of Cooking Time
Step 1
•
Select the oven mode and the temperature required using the function
and the thermostat switches.
Step 2
•
Auto mode is activated when you press (1) or (2).
•
The press button (1) or (2) to set and adjust the cooking time.
•
The display will show briefly the time entered and then revert back to the
clock display.
•
The oven is now in auto mode and the Auto indicator is displayed.
•
If through the cooking time you would like to see how long is left, press
either buttons (1) or (2) once (and briefly) and the remaining time will be
displayed momentarily.
•
At the end of cooking time an acoustic signal is activated, the oven will
turn off and the auto indicator will flash. You will need to either:
Option 1 - Turn off oven function and temperature switches.
o
Push buttons (1) or (2) once to cancel the acoustic signal. Push
button (1) or (2) once again to put the oven back to manual mode.
Option 2 – if you wish to continue cooking at this point you need
o
to put the oven back into manual. First of all stop the acoustic
signal by pressing either button (1) or (2). Then press button (1) or
(2) again to return to manual mode. Remember to turn off the
oven function and temperature switches when you have finished
cooking.
A
U
T
O
1
2
will be
13
Hide quick links:
Advertisement
Table of Contents
