HP dv3 Entertainment PC Maintenance And Service Manual page 67

Hide thumbs Also See for dv3 Entertainment PC:

Table of Contents

Remove the fan/heat sink assembly (3).

NOTE:

The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink

assembly (1), (3), and (5); the processer (2); capacitor (6); and the graphics chip (4) each time the heat

sink is removed. Thermal pads and thermal paste must be installed on all surfaces before the heat sink

is reinstalled. Thermal pads and thermal paste are included with all heat sink, system board, and

processor spare part kits.

Reverse this procedure to install the fan/heat sink assembly.

Component replacement procedures

Table of Contents