Christie LX501 User Manual / Technical Manual page 41

Commands Control Description
ERST ? Error Status inquiry
LAMP ? Lamp Status inquiry
INST ? Input Source List inquiry
NAME ? Projector Name inquiry
Manufucturer's Name
INF1 ?
INF2 ? Model Name inquiry
INFO ? Other Information inquiry
CLSS ? Class Information inquiry 1
NOTE • The password used in PJLink
in the Web Control. To use PJLink
password in Web Browser Control.
• For specifications of PJLink
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/ (as of Jun. 2012)
Technical Guide
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to 2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected;
1 = Warning;
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
11 12 21 22 23 31 33 41 51 52
Responds with the name set in the item
PROJECTOR NAME of the NETWORK menu
CHRISTIE
inquiry
LX501
LX601i
LW401
LW551i
LWU421
LWU501i
Responds with the factory information and so
on
without authentication, do not set any
TM
, see the web site of the Japan Business
TM
PJLink command (continued)
Parameter or Response
2 = Error
is the same as the password set
TM
39
020-000503-02 Rev. 1 (06-2012)