Table of Contents
Advertisement
Signamax Connectivity System
3.5 Factory Settings
NOTE: This operation will erase all parameters and reset them to factory
settings, please consult the network administrator first.
1. Enter 【ROOT】 menu, select 【RESET】.
2. Press 【OK】, the phone will display warning message.
3. Press 【OK】, the phone will restart automatically.
3.6 Configure by Web Browser
065-9013 IP Phone has a built-in HTTP server for the user to do the configuration
via web browser. Editing the parameters on the web, then press "apply" at lower
right corner and reboot the phone to make the change activated.
1. Launch IE on a computer. In the address field of IE, enter the IP address of the
phone (press 【HOLD】 in idle mode to check the Phone's IP address), and then
select the user name (user or root) and input password to logon.
2. After logon, the page will show the current settings about account and
network.
www.signamax-us.com
Root
Reset
▌
Select
Warning! This operation will
delete all user settings.
OK
Phone is rebooting.
21
2-7
▌
Back
Cancel
www.signamax-eu.com
065-9013
Advertisement
Table of Contents
