Summary of Contents for SignaMax 065-9013
-
Page 1: Contents
Signamax Connectivity System 065-9013 Signamax™ Connectivity Systems VoIP IP Phone Model:065-9013 User’s Manual www.signamax-us.com www.signamax-eu.com... -
Page 2: Table Of Contents
Signamax Connectivity System 065-9013 CONTENTS CONTENTS ..............................1 1. TECHNICAL PARAMETERS INTRODUCTION................4 1.1 C ............................4 ONTENTS 1.1.1 Standard: ........................... 4 1.1.2 Optional: ............................ 4 1.2 S .......................... 4 UPPORT ROTOCOL 1.3 S ..........................4 UPPORT ODEC 1.4 H ........................ - Page 3 Signamax Connectivity System 065-9013 4.1.8 Call Forward............................31 4.1.9 Shared Lines Function......................31 4.1.10 3-way Conference........................ 31 4.1.11 Conference Function......................31 4.1.12 Do Not Disturb (DND)......................31 4.1.13 Mute ............................31 4.2 T ........................... 32 ETTING 4.3 R ......................33...
-
Page 4: Signamax Connectivity System
Signamax Connectivity System 065-9013 1. TECHNICAL PARAMETERS INTRODUCTION 1.1 Contents 1.1.1 Standard: Telephone base unit Handset Handset cord Power adaptor User’s manual 1.1.2 Optional: RJ-45 Ethernet cable Headset 1.2 Support Protocol SIP: RFC3261 DTMF: inband, RFC2833, SIP Info RTP: RFC1889... -
Page 5: Hardware Parameters
Signamax Connectivity System 065-9013 1.4 Hardware Parameters 1.4.1 Standard: CPU: Infineon PSB21553 Data Memory: 8MB SDRAM Software Memory: 2MB Flash memory Ethernet Port: 2 RJ-45 plugs,IEEE802.3 10/100 Base-T Power Adaptor: Input 110-250V, Output 5V DC, 1A Keypad: 36keys LCD: 4x20 char-based, white backlight LED: 2 Leds 1.4.2 Optional:... -
Page 7: Description
Signamax Connectivity System 065-9013 2.2 Description TITLE DEFINITION NOTE Soft key for the guiding text shown on the bottom-left of the screen: “OK”, “Select”, “Erase” or “YES” Enter the menu Confirm the changes made Start a 3-way conference call Soft key for the guiding text shown on the bottom-left of the screen: “Cancel”, “Back”... - Page 8 Signamax Connectivity System 065-9013 Dial out the last called number in talk/speakerphone mode Switch the input mode REDIAL between the number and the character when editing Enter the list of number dialed During the call, put a call on hold...
- Page 9 Signamax Connectivity System 065-9013 Record call during conversation RECORD Play and Access the recorded messages Configure speed dial numbers SPEED DIAL Press the location number and 【SPEED DIAL】to dial Turn off the volume of the MUTE microphone during the call or ringing 1 .
-
Page 10: Phone Configuration
Signamax Connectivity System 065-9013 3. PHONE CONFIGURATION NOTE: 1. It will take 15 seconds to start up because of network initialization. Please wait and DO NOT cut off power. 2. DO NOT cut off power during upgrading. Maybe it will lead to fatal error. -
Page 11: Configure Network Parameters
Signamax Connectivity System 065-9013 Network 1-1-1 External mode ▌ STATIC ▌ Select Back 4. Enter the 【External Mode】 menu. Select a correct IP addressing mode: Static, DHCP or PPPoE. 1-1-1-1 STATIC ▌ DHCP ▌ Select Back 3.1.2 Configure Network Parameters STATIC Mode Select 【STATIC】... -
Page 12: Review Network Parameters
Signamax Connectivity System 065-9013 DHCP Mode 1. Select 【DHCP】 mode and return, there is no need to input any other parameter. Network 1-1-1 External mode ▌ DHCP ▌ Select Back PPPoE mode 1. Select【PPPoE】mode. Network 1-1-1 External mode ▌ PPPoE ▌... -
Page 13: User Account Configuration
Signamax Connectivity System 065-9013 Enter 【External NIC】 menu or press 【HOLD】 in idle mode, then use 【 】 and 【 】 to review all the parameters. 3.2 User Account Configuration 1. In idle mode, press 【OK】 to enter the main menu and select 【Root】 menu. -
Page 14: Proxy Port
Signamax Connectivity System 065-9013 Line1 2-1-1-2 Proxy Port ▌ xxxx ▌ Select Back Proxy Port xxxx Clear 5. Enter the username provided by service provider. Line1 2-1-1-3 UserName ▌ 123456 ▌ Select Back UserName 123456 6/40 Clear 6. Enter the auth name ( This parameter maybe is the same as username, or you can leave it blank ). - Page 15 Signamax Connectivity System 065-9013 Password ****** 6/40 Clear 8. Enter the realm address. Line1 2-1-1-6 Realm ▌ xxx.xxx.xxx ▌ Select Back Realm xxx.xxx.xxx 11/40 Clear 9. If you need to setup parameters for register interval, heartbeat interval, options interval or DTMF mode and so on, configure them in a similar way.
- Page 16 Signamax Connectivity System 065-9013 Encrypt server port 55060 OK 123 5/6 Clear 12. Enter the encrypt depth, 128 or 256. Crypto1 2-1-2-3 Sip Encrypt depth ▌ 256 ▌ Select Back Sip Encrypt depth OK 123 3/10 Clear 13. Select the Cryptographic algorithm.
-
Page 17: Change Passwords Of User And Root
Signamax Connectivity System 065-9013 2-1-3-1-2 None ▌ ▌ Select Back 16. Enter the forward number. Forward1 2-1-3-2 Forward No ▌ 10000 ▌ Select Back Forward No 10000 OK 123 5/39 Clear You can also press 【FORWARD】 key in idle mode to configure forward parameters, input the password of root, enter Forward menu to set them. - Page 19 Signamax Connectivity System 065-9013 Select Back If using default setting, the route of upgrade will be directly to our update server, the parameters about such upgrade cannot be changed. Update config Use default ▌ Yes ▌ Select Back If you want to set the route by yourself or set it to another address, please change “Use default”...
-
Page 20: Upgrade
Signamax Connectivity System 065-9013 Update config FTP Path ▌ /update ▌ Select Back FTP Path /update 7/30 Clear Enter the username of server. Update config FTP User ▌ user ▌ Select Back FTP User user 4/30 Clear Enter the password of server. -
Page 21: Factory Settings
Phone is rebooting. 3.6 Configure by Web Browser 065-9013 IP Phone has a built-in HTTP server for the user to do the configuration via web browser. Editing the parameters on the web, then press “apply” at lower right corner and reboot the phone to make the change activated. -
Page 28: Phone Functions Operation
Signamax Connectivity System 065-9013 4. PHONE FUNCTIONS OPERATION 4.1 Call Functions 4.1.1 Make a Call 1. In idle mode, pick up the handset or press【HANDFREE】,or press【Line1】 【Line2】 【Line3】 , dial the telephone number, press 【#】 to make a call. If there is a dial plan, the call number will be limited by the dial plan. -
Page 29: Redial
Signamax Connectivity System 065-9013 Name1 ▌ Name2 ▌ Name3 ▌ Detail Exit Select the name, press【OK】, then select the tel number or mobile number, pick up handset or press【HANDFREE】to start the call. 3. Make a call from call log: In idle mode, press 【CALL LOG】... -
Page 30: Receiving A Call
Signamax Connectivity System 065-9013 4.1.4 Receiving a Call When the phone is ringing, the incoming call number will be displayed on the LCD. Pick up the handset or press【HANDFREE】to answer the call. Ringing: Ringing 00:00:00 1234567 2 Idle 3 Idle... -
Page 31: Call Forward
Signamax Connectivity System 065-9013 【LINE2】 to receive the new call (assume the new call is from LINE 2), and then the previous call will be held. And then press 【LINE1】 to resume the previous call and the new call becomes to be held. -
Page 32: Time Setting
Signamax Connectivity System 065-9013 to deactivate the function. When the phone is ringing, press 【MUTE】, the ring will be shut off. 4.2 Time Setting 1. In idle mode, enter User setting menu. Select the option【Clock】. Set the date by entering year, month and day. -
Page 33: Ring, Volume And Sidetone
Signamax Connectivity System 065-9013 GMT＋08:00 GMT＋09:00 GMT＋10:00 Exit 4. To get the time from network time server, select【SNTP Server】. The phone has 9 time network servers. Select the desired server. Clock 1-3-4 SNTP Server ▌ time-nw.nist.gov ▌ Select Back SNTP Server 1-3-4-8 time-nw.nist.gov... - Page 34 Signamax Connectivity System 065-9013 Tones 1-2-1 Ringing tone ▌ Type 2 ▌ Select Back Ringing tone 1-2-1-2 Type1 ▌ Type2 ▌ Select Back 2. Select【Ringing volume】. User can select the volume level (from level 1 to level 5). Tones 1－2－2...
-
Page 35: Spevolume Of Call Adjusting
Signamax Connectivity System 065-9013 1-2-4-1 ▌ Level 1 ▌ Select Back 4.4 SpeVolume of Call Adjusting In dialing mode or during a call, press【MIC】to adjust the microphone volume. Press【VOL】to adjust the volume of receiver (in handset mode) or speaker (in speakerphone mode). -
Page 36: Call Log
Signamax Connectivity System 065-9013 Search by... Name ▌ ▌ Select Back 3. Select【Erase】. User can delete items one-by-one or delete all items. NOTE: The deleted items cannot be recovered, so please be cautious when performing this operation. -Erase- One-by-one ▌... -
Page 37: Message And Record
Signamax Connectivity System 065-9013 Save number to... ▌ Mobile ▌ Select Back Name 0/20 Back ⅱ. EDIT: User can edit the telephone number. Reset number to: 123457 6/20 Clear ⅲ. ERASE: The unit will prompt you if you are sure to erase the entry. -
Page 38: Recording Function
Signamax Connectivity System 065-9013 4.7.2 Recording Function 1. Recording: Press【RECORD】during a call to record the phone conversation. Recording can be pauses and stopped. 2. Play back recording messages: In idle mode, press【RECORD】. 3. Delete recording messages: During message playback, press【OK】. -
Page 39: Hardware Examination
Signamax Connectivity System 065-9013 17:53:12 System locked Password<_ > IME:123 0/8 4.11 Hardware Examination The Phone has the hardware test program which is under 【Root】 menu. If user enter the menu by mistake, he/she can power off the unit to exit. Then power on the unit will reboot the phone back to idle mode.