Table of Contents
Advertisement
Signamax Connectivity System
DHCP Mode
1. Select 【DHCP】 mode and return, there is no need to input any other parameter.
PPPoE mode
1. Select【PPPoE】mode.
2. Enter the PPPoE user ID provided by the service provider. The username for
example below is "user".
3. Enter the password.
4. Return and reboot the phone, The LCD will be displaying " PPPoE
connecting..." until registration succeeds. If not, the phone will prompt to
reconnect again.
If fail, please check your configuration or contact your ADSL service provider.
3.1.3 Review Network Parameters
www.signamax-us.com
Network
External mode
Select
Network
External mode
Select
PPPoE user ID
User
OK
abc
4/40
Password
******
OK
abc
6/40
PPPoE connecting ......
Retry?
Yes
12
1-1-1
▌
DHCP ▌
Back
1-1-1
▌
PPPoE ▌
Back
Back
Clear
No
www.signamax-eu.com
065-9013
Advertisement
Table of Contents
