Configure Network Parameters - SignaMax 065-9013 User Manual

Signamax Connectivity System
4. Enter the 【External Mode】 menu. Select a correct IP addressing mode: Static,
DHCP or PPPoE.

3.1.2 Configure Network Parameters

STATIC Mode
Select 【STATIC】 mode, enter the network parameters by the telephone keypad.
1. Enter the IP address. It is default separated into 4 parts; each part consists of
3 digits. For example: 192.168.1.58 can be entered as in sequence as
"1921681【RIGHT】58" or "1921681*58".
2. Enter the gateway address.
3. Enter the subnet mask address.
4. Enter the DNS address. You can input 3 DNS servers, it is no need to input all
3 DNS entries.
www.signamax-us.com
Network
External mode
Select
STATIC
DHCP
Select
Ext ip address
192.168. 1 .58
OK
Ext gw address
192.168. 1 . 4
OK
Ext subnet
255.255.255. 0
OK
Ext dns1
192.168. 1 . 4
OK
11
1-1-1
▌
STATIC ▌
Back
1-1-1-1
▌
▌
Back
Back
Back
mask
Back
Back
065-9013
www.signamax-eu.com