Table of Contents
Advertisement
Signamax Connectivity System
3. PHONE CONFIGURATION
NOTE:
1. It will take 15 seconds to start up because of network initialization.
Please wait and DO NOT cut off power.
2. DO NOT cut off power during upgrading. Maybe it will lead to fatal error.
3. The default user name and password of the phone and web
configuration are user/000000 and root/111111. Please DO remember
your password if you have it changed.
3.1 Network Configuration
If the network administrator assigns your phone a static IP or the DHCP
function has been disabled (generally enterprise users having LAN network
use this mode), please refer to Static Mode.
If the network administrator has enabled the DHCP function, and the phone
get IP address by DHCP, please refer to DHCP Mode.
If you connect to the Internet directly by ADSL (most home users and
company users without LAN use this mode), please refer to PPPoE Mode.
3.1.1 Select IP Addressing Mode
1. In idle mode, Press【OK】to enter the main menu, select【User】.
2. You are prompted to enter the password.
3. Select【Network】, And the current setting is displayed. The example below is
in Static Mode.
www.signamax-us.com
Settings
User
Root
Select
Password
******
OK
123
6/20
User
Network
Select
10
1
▌
▌
Back
Clear
1-1
▌
▌
Back
www.signamax-eu.com
065-9013
Advertisement
Table of Contents
