NETGEAR R6050 User Manual page 110

To set up approved USB devices:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > USB Settings.
5. Click the Approved Devices button.
This screen shows the approved USB devices and the available USB devices.
6. In the Available USB Devices list, select the drive that you want to approve.
7. Click the Add button.
8. Select the Allow only approved devices check box.
9. Click the Apply button.
Your change takes effect.
If you want to work with another USB device, first click the Safely Remove USB Device
button for the currently connected USB device and physically remove the device. Connect
the other USB device and repeat this process. For more information, see
USB Device on page 102.
AC750 Wireless Dual Band Gigabit Router R6050
Share USB Devices Attached to the Router
110
Safely Remove a