Beem BMG5 Operation Instruction & Owner's Manual page 18

Natural gas & lpg generator set
Table of Contents

Advertisement

Start Engine
!
Notice
If your engine is starting, do an inspection on
the top cooling fan, and ensure it is operating.
Otherwise, you should stop the engine.
!
Notice
If the engine starts but does not run, make certain that the generator is on a flat, level surface. The
engine is equipped with a low oil sensor that will prevent the engine from running when the oil level
falls below a critical threshold.
!
Caution
1.
This generator must have at least 5 feet (about 1.5 meters) of clearance from combustible
material.
2.
Leave at least 3 feet (about 1 meter) of clearance on all side of the generator to allow for
adequate cooling, maintenance and servicing.
3.
Place the generator in a well-ventilated area.
4.
DO NOT place the generator near vents or intakes.
17

Advertisement

Table of Contents
loading

Table of Contents