Table of Contents
Advertisement
Assembly
Assembly Introduction
Your generator requires some assembly.
This unit ships from our factory without engine oil.
It must be properly serviced with fuel and oil before operation.
If you have any question regarding the assembly or your generator, call your help line of authorized
sales & service distributor/ dealer. Please have your engine & air-fuel mixer serial number and
model number available.
Install vibration mount
Before installing vibration mount, make sure NO LUBE OIL inside the crankcase .
!
Warning
All the vibration mounts must be installed to ensure enough air flow rate.
Otherwise the generator will be easily over heating & break down.
Install Battery
Attach the red lead to the red terminal on the battery with cap screw & nut.
!
Warning
The 12V DC Battery is usually equipped with ELECTRICAL START GENERATOR SET.
1.
DO NOT use the battery if it is leaking, or abnormal in any other way.
2.
DO NOT connect the battery in reverse polarity.
3.
Charge the battery equipped with generator for firstly use.
10
Advertisement
Table of Contents
