Table of Contents
Advertisement
IP CamSecure
5.15 Help
Click Help to connect to FAQ of LEVELONE website http://support.LevelOne.com.
5.16 About Main Console
Go to About Main Console to view the version of your surveillance system and the hardware information.
5.17 Video Source
(For system with MPEG4 capture device only)
Step 1:
Go to Video Source to adjust the Video Standard to NTSC or PAL.
Step 2:
Adjust the maximum Video Resolution for all analog cameras.
Video Resolution
Turbo mode
Standard mode
High Quality mode
Step 3:
Click Sync all video signal level after pressing OK to synchronize video signal level to the optimized
display (Auto-gain control).
Frame Rate
Higher
Normal
Lower
-
87 -
Quality
Lower
Normal
Higher
LevelOne
Advertisement
Table of Contents
