Connecting To Monitor; Bottom View - Samsung SDZ-375 User Manual

Overview

Bottom View

3
4
Key Buttons
3
Following buttons control zoom, focus, and auto focus functions.
WIDE button : To widen the view. (ZOOM OUT)
TELE button : To close in on a far object. (ZOOM IN)
F-NEAR button : To see a near object clearly.
F-FAR button : To see a far object clearly.
Pressing the 'SET' button locks the zoom control function of these buttons and
prompts the main setup menu.
Main setup menu can be navigated using these buttons.
SET : To access the main setup menu.
UP (TELE button) : To move the arrow indicator to up.
DOWN (WIDE button) : To move the arrow indicator to down.
LEFT (F-NEAR button) : To move the arrow indicator to left.
RIGHT (F-FAR button) : To move the arrow indicator to right.
Power Input Terminal
4
Power supply terminal (DC12V±10%).
5 Power LED
Illuminates when power is supplied.
Video Output Jack
6
Used to connect an external video monitor in jack.
RJ-45 JACK
7
Terminals, such as RS-485 communications, MD OUT, ZOOM, and FOCUS, EX_DN
are areincluded.
COLOR CCD CAMERA
5
6
7
10
User Guide

Connecting to Monitor

Connect Video Out Jack to the monitor's Video In jack as shown below.
CCD Camera
• Connection methods may vary depending on the video equipment. Please refer to
the model specific instruction manual.
• Connect cables with the unit powered down.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.
CCD Camera
Intermediate
COLOR CCD CAMERA
Connection
Monitor
End monitor
11
User Guide