Zephyr Monsoon II AK9334AS Use, Care And Installation Manual page 17

SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.
using hood.
pull towards front of insert using handles.
Hood Model: Part No.
AK9340AS 50210013
AK9352AS 50210013
Cleaning the Grease Tray
gently scrubing any residue off with a soft terry cloth. Dry grease tray and re-install before using hood.
Removing the Grease Tray
Grease tray has a hooked lip that attaches to bottom panel top edge.
Remove grease tray by:
1. Pull up on tray to release from bottom panel. FIG. 6-1
2. Pull tray out of insert body. FIG. 6-2
Qty. to Order
3
4
1
15
1
2
FIG. 5
1
2
FIG. 6