Advertisement
3.
S S e e l l e e c c t t a a M M e e n n u u . . Press and H H O O L L D D the Valet®/Program switch. (The Valet®/Program switch
must be plugged into the blue port.) After three seconds the siren will chirp once indi-
cating entry to the Basic Features Menu. If this is the menu you wish to access, release
the button and go on to Step 4. If the button is not released, you will jump to the next
menu and the siren will chirp twice. There are three possible menus. Once you have
selected the desired menu, release the Valet®/Program switch.
S S e e l l e e c c t t a a F F e e a a t t u u r r e e . . Press and release the Valet®/Program switch the number of times corre-
4.
sponding to the feature you wish to change. For example, to access the third feature, press
and release 3 times. Then press the button once more and H H O O L L D D it. The siren will chirp the
number of times equal to the feature you have accessed.
5.
P P r r o o g g r r a a m m t t h h e e F F e e a a t t u u r r e e . . While holding the Valet®/Program switch, you can toggle the feature
on and off using the remote transmitter. Pressing the button that arms the system will
select the one chirp or default setting. Pressing the button that disarms the system (or the
Channel Two button when in the single button arm/disarm configuration) will select the
two chirp setting.
N N O O T T E E : : Some features have more than two possible settings. Pressing Channel One will select the
one chirp setting, pressing Channel Two will toggle through the two-chirp and higher settings.)
6.
R R e e l l e e a a s s e e . . Release the Valet®/Program switch.
O O n n c c e e a a f f e e a a t t u u r r e e i i s s p p r r o o g g r r a a m m m m e e d d : :
■
Other features can be programmed within the same menu.
■
Another menu can be selected.
■
The learn routine can be exited if programming is complete.
T T o o a a c c c c e e s s s s a a n n o o t t h h e e r r f f e e a a t t u u r r e e i i n n t t h h e e s s a a m m e e m m e e n n u u : :
1. Press and release the Valet®/Program switch the number of times necessary to advance from the feature you
just programmed to the next one you want to program.
2. Then press the Valet®/Program switch once more and H H O O L L D D it.
For example, if you just programmed the third feature in the menu and you would like to program the seventh
feature in the menu, you would press and release the Valet®/Program switch four times and then press it once
more and H H O O L L D D it. The siren would chirp seven times to confirm access to the seventh feature.
T T o o s s e e l l e e c c t t a a n n o o t t h h e e r r m m e e n n u u : :
1. Press and hold the Valet®/Program switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which menu
has been accessed.
© 2004 Directed Electronics, Inc. Vista, CA
3 3 9 9
Advertisement
