Rear Panel - Laboga The Beast 30W Plus - head User Manual

1. Main fuse integrated with mains
power supply socket
Slo-Blo fuse T1,25A is in
the case, integrated with
power
There is one spare fuse
included.
HINT:
power
storm or when unused.
HINT: While changing the fuse, make
sure the blades of the fuse socket are
properly installed.
ATTENTION! Before you change
the fuse,
amplifier from the power outlet.
ATTENTION! Always change the
fuse for one of the same value.
2. Socket double button footswitch
TRS jack socket, which controls the
channel switching. Use a double button
footswitch with "stereo" cable – check
description on front panel Channel and
Crunch for more details.
plug into this socket, brakes internal
LABOGA – The Beast 30 Plus

REAR PANEL

supply socket.
Take out the
cord during
always unplug the
Inserting a
Combo:
Head:
connection
bypasses
switches.
3. Return socket
Effects
switchable level. Plugging any jack in
the
internal connection between preamp
a
and power amp. Therefore it can be
used also as a power amp input with
line level (+4dB) or instrument level (-
10dB) signal, so you can plug here the
alternative
simple stomp box.
4. Effects loop level switch
It switches the signal level in the
effects loop between -10dB (instrument
level) and +4dB (pro line level).
5. Send socket
Effects
switchable level. Plugging any jack in
the
internal connection between preamp
and power amp. Therefore it can be
used also as a power amp input with
line level (+4dB) or instrument level (-
10dB) signal, so you can plug here the
in the amplifier,
the front-panel
loop return
socket, brakes the
preamplifier,
loop send
socket, brakes the
which
channel
socket with
amplifier's
including a
socket with
amplifier's
Page 8