Safety Precautions - Laboga The Beast 30W Plus - head User Manual

This symbol is intended to alert the
user to the presence of dangerous
voltage and constitutes a risk of
electrical shock.
Be cautious while transporting the cabinet and do not put it in an unstable place.
 To avoid electrical shock never open the amplifier's cover. In case of failure, refer servicing to
qualified personnel.
 Do not use the amplifier in humid and dusty places.
 Amplifier produces high volume levels. Staying in places of high volume levels could cause
permanent hearing loss.
 do not install the apparatus near any heat sources and do not cover the back side of the
amplifier, let the airflow cool the amplifier.
 Always use the highest quality signal cables (we recommend Laboga cable "Way of sound") and
volume signal cables. Using improper speaker cables could cause damage to the amplifier.
 Do not operate the amplifier through the unearthed mains socket.
 Tubes or metal chassis can get heated intensively, do not touch it or it could cause burning.
 Do not leave the apparatus in the vicinity of children.
 Unplug the amplifier before tube change, unplug the cord and wait for the tubes to cool down.
 Before changing the fuse, switch the amplifier off and unplug the cord. Also, make sure you use
the fuse of the proper rate.
 Replace power tubes with well matched quartet.
LABOGA – The Beast 30 Plus

SAFETY PRECAUTIONS

ATTENTION:
remove the back cover of the amplifier. Inside parts can be
repaired only by qualified service personnel.
WARNING:
expose this appliance to moisture, rain or any liquid.
ATTENTION !!!
!! Keep this instruction for the future use !!
To reduce the risk of electrical shock, do not
To prevent the risk of electrical shock do not
This symbol alerts the user to the
presence of important operating
and maintenance instructions.
Page 4