Navigating To A Destination - HP iPAQ Navigation system Getting Started Manual

navigating to a destination

Acquiring a satellite fix:
Position the hp Bluetooth GPS receiver in the vehicle
1
window so that the receiver has an unobstructed view
of the sky. When the green LED flashes, the satellites
have located the receiver.
(NOTE: The Bluetooth GPS receiver may take 5-10 minutes to
acquire a fix on the three satellites needed to accurately position the
vehicle. In the event that the GPS receiver does not acquire a fix
within 5-10 minutes, reposition the GPS receiver and try again.)
From the iPAQ Navigation System, tap View at
2
the bottom of the screen and tap Map. A map
display will appear centered on your current
location. Your current location is depicted as a
green arrow in a blue circle
(NOTE: A yellow arrow indicates low GPS signal; a red arrow
indicates no GPS signal. Reposition the GPS receiver and try again.)
go
Checklist before you begin:
1 My iPAQ Pocket PC is on.
®
2 My Bluetooth GPS receiver is charged
and the power is on. The blue LED is
flashing and the green LED is solid.
3 The iPAQ Navigation System application
is running.