Sony HT-SF470 Operating Instructions Manual page 9

About the indicators on the display
Name
[]LPCM
~NIGHT
~SLEEP
@]Input
indicators
HDMI
COAX
OPT
[IDTuning
indicators
TUNED
ST
[[J
S-AIR
[I]
MUTING
Function
Lights up when Linear PCM
(Pulse Code Modulation) signals
are input.
Lights up when the Night Mode
function is set to on (page 34).
Lights up when the sleep timer is
activated (page 62).
Light up when the digital signal
is input.
Digital signal is input through
the HDMI IN jack.
Digital signal is input through
the COAX IN jack.
Digital signal is input through
the OPT IN jack.
Light up to indicate the current
status of the radio station (page
35).
When receives a radio station.
When broadcasts in stereo mode.
Lights up when the S-AIR
transmitter (not supplied) is
connected.
Lights up when the muting
function is acti vated.
Name
ammo
[D]
Dolby Pro
Logic
indicators
m
PL
m
PLII
Function
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections.
Lights up one of the respective
indicators when the receiver
applies Dolby Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
lID
DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections.
[ID
Message
Displays the volume level,
display area selected input source, audio
input signal, etc.
conffnued---------
gus