Enjoying The Sound At Low Volume (Night Mode) - Sony HT-SF470 Operating Instructions Manual

C=LJ=:r~T=I_-:c:J
You can enjoy sound effects and hear the
dialog clearly even at a low volume level using
this function. This function is useful for
enjoying sound at night.
Enjoying the sound at low
volume
(NIGHT MODE)
AMP
MENU
o
8,
.1+1.1.
1
Press AMP MENU.
"LEVEL" appears on the display.
2
Press
+,+
repeatedly until
"AUDIO" appears, then press
8
or •.
3
Press
+'+
repeatedly until
"NIGHT MODE" appears, then
press
8
or •.
4
Press
+'+
repeatedly until
"NIGHT ON" appears, then
press
8.
"NIGHT" lights up on the display.
• NIGHT ON: Turn on the NIGHT
MODE.
• NIGHT OFF: Turn off the NIGHT
MODE.
The initial setting is "NIGHT OFF".
5
Press AMP MENU.
The AMP menu turns off.
Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• Multi channel Linear PCM is not available for
"P. AUDIO".
• The movie and music mode do not work when:
- signals with a sampling frequency of more than
48 kHz is input.
- the multi channel Linear PCM signals are
received via an HDMI IN jack.
• The sound is not output from multiple speakers
depending on the source.
• Depending on the disc or source, the beginning of
the sound may be cut off as the optimum mode is
automatically selected. To avoid cutting the sound,
select "A.F.D. STD".
• When the input signal is multi channel source,
Dolby Pro Logic II MOVIEIMUSIC are canceled
and the multi channel source is output directly.
• When the bilingual broadcast sound is input, Dolby
Pro Logic II MOVIEIMUSIC are not effective.
• Depending on the input stream, the decoding mode
may not be effective.
• When you select "MOVIE-D.C.S.-" depending on
the input stream, Dolby Pro Logic may be applied
automatically.
• When changing the sound mode while using the
S-AIR receiver (not supplied), sound from the
S-AIR receiver (not supplied) may skip.
Tip
You can identify the encoding format of DVD
software, etc., by looking at the logo on the package.
34
US