Bravia" Sync Features; What Is "Bravia" Sync; Preparing For The "Bravia" Sync - Sony HT-SF470 Operating Instructions Manual

"BRAVIA" Sync Features
What is "BRAVIA" Sync?
"BRAVIA" Sync is compatible with Sony TV,
Blu-ray DisclDVD player, AV amplifier, etc.,
that is equipped with the Control for HDMI
function.
By connecting Sony components that are
compatible with the "BRAVIA" Sync using an
HDMI cable (not supplied), operation is
simplified as follows:
• One-Touch Play (page 41)
• System Audio Control (page 41)
• System Power Off (page 43)
• Audio Return Channel (ARC) (page 45)
• Theater Mode (page 46)
Control for HDMI is a mutual control function
standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-
Definition Multimedia Interface).
The Control for HOMI function
will not operate correctly in the
following cases:
• When you connect the receiver to a
component which does not correspond with
Sony Control for HDMI function.
• When you connect the receiver and
components using other than HDMI
connection.
We recommend that you connect the receiver
to products featuring "BRAVIA" Sync.
Note
Depending on the connected component, the
Control for HDMI function may not work. Refer to
the operating instructions of the component.
Preparing for the
"BRAVIA" Sync
To use the "BRAVIA" Sync, turn the Control
for HDMI function on for both the receiver
and the connected component. The receiver is
compatible with the "Control for HDMI-Easy
Setting" function.
When your TV is compatible
with the "Control for HOMI-Easy
Setting" function
When you connect a Sony TV with the
"Control for HDMI-Easy Setting" function,
the Control for HDMI function of the receiver
can be turned on simultaneously by turning the
Control for HDMI function of the TV on.
1
Make sure that the receiver, TV, and
playback components are connected
using an HOMI cable (not supplied).
(The respective components must be
compatible with the Control for HOMI
function).
2
Turn on the receiver, TV and the
playback components.
3
Turn the Control for HOMI function of
the TV on.
The Control for HDMI function of the
receiver and all the connected components
are simultaneously turned on. When the
setup is completed, "COMPLETE" will
appear. Wait until the setup is complete.
For details on setup of the TV, refer to the
operating instructions of your TV.
•
conUnued---------