SC-HM910/SC-HM810
Step 11 Remove 4 screws.
Step 12 Remove mechanism Deck P.C.B.
* The mechanism as shown below is for DECK 1. For the one of
DECK 2, perform the same procedures.
Pinch roller ass'y (R)
(RXL0125)
7.9. Replacement for the CD motor ass'y. capstan belt A, capstan belt B
and winding belt
• Follow the (Step 1) - (Step 2) of item 7.1
• Follow the Disassembly for the CD Changer of item 7.2.
• Follow the (Step 1) - (Step 14) of item 7.4.
• Follow the (Step 1) - (Step 11) of item 7.9
Step 1 Release the 2 claws, and then remove the head con-
nector.
Step 2 Remove 6 screw.
Step 3 Remove the sub chassis
26
Step 13 Release the 2 claws, and then remove the pinch roller
(R), (F).
Step 14 Release ther 2 claws, and then remove the head con-
nector.
(Head Blook
DECK1: RED0063-1
DECK2: RED0074-1)
Step 15 Remove 2 screws.
(Step 15)
a
x 2