Download Print this page
LockState Wi-Fi User Manual

LockState Wi-Fi User Manual

Electronic deadbolt lock

Advertisement

Quick Links

LockState
1325 S. Colorado Blvd. Suite 400 Denver, CO 80222
(877) 254-5625
®
WI-FI
WI-FI
WI-FI
ELECTRONIC DEADB LT LOCK
O
2
3
4
5
1
8
7
9
6
0
USER MANUAL

Advertisement

loading

Summary of Contents for LockState Wi-Fi

  • Page 1 ® WI-FI WI-FI WI-FI ELECTRONIC DEADB LT LOCK LockState USER MANUAL 1325 S. Colorado Blvd. Suite 400 Denver, CO 80222 (877) 254-5625...
  • Page 2: Installation Instructions

    WI-FI ELECTRONIC DEADBOLT 3. Install Latch a. Insert the latch and ensure it is paralleled to INSTALLATION INSTRUCTIONS the door face. Mark the outline of the faceplate, then take out the latch. The BACKSET is the distance between the center of cross bore and edge bore of the door.
  • Page 3 5. Install Keypad Assembly 8. Adjusting Turn Piece a. Ensure the latch bolt must be retracted. Turn the turn piece to left for 45 degrees when it's right-handed door. b. Please refer to the diagram below for Cylinder Installation. Turn the turn piece to right for 45 degrees Place deadbolt against keypad with tailpiece in horizontal when it's left handed door.
  • Page 4 The Programming/Enter Button is utilized for unlocking the door after entering Your lock has a built in Wi-Fi chip that allows you to program and control your lock from user codes, clearing errors and programming the lock. It's also a lock button.
  • Page 5 2 beeps. If not connected successfully, you will see 2 green flashes followed Disable all user code by 3 red flashes and beeps. If this occurs, reset your Wi-Fi connection go through the connection process again. Enter PC Note: This function will provide privacy if you want to ensure no active codes can unlock the door.
  • Page 6: Programming Code

    2. There is only one Programming Code for function setting. 1. You can reset Wi-Fi connection on your lock if needed. This would likely be needed if 3. Programming Code is only for function setting, you can't unlock the door by pressing you purchase a new router and need to enter the new SSID and password for your new Programming Code.
  • Page 7: Simple Troubleshooting

    12. Lock the door Simple Troubleshooting The door will be locked by key, pressing the LockState/Enter button on the keypad from outside, by interior turn-piece, or from your online account. Situation 1 (Deadbolt Lock Only) After the installation of the deadbolt lock and batteries, pressing the 13.