Exiting From The Ibm Setup Utility Program; Using Passwords; User Password - IBM 2283 User Manual

When working with the program menu, you must use the keyboard. The
following table shows the keys used to accomplish various tasks.
Use these arrow keys to move among menu items until the item you want is
highlighted.
Use these arrow keys to display and toggle among choices for a menu item.
Enter Press this key to select a highlighted menu item.
Press this key to exit from a menu after viewing or making changes to the settings
Esc
in the menu.
Use this key in some menus to increase the numerical value of a setting.
Use this key (the minus or hyphen key) in some menus to decrease the numerical
value of a setting.
Use the number keys in some menus to change the numerical value of a setting.
0 - 9
F1 Press this key for help on a selected menu item.
F9 Press this key if you changed and saved the setting of a selected menu item and
you want to restore the setting that was active before you made the change.
F10 Press this key to return the setting of a selected menu item to a default value.
Note: Active keys are displayed at the bottom of each screen; not all of these
keys are active on every menu.

Exiting from the IBM Setup Utility program

When you finish viewing or changing settings, press Esc to go to the Exit menu
(you might have to press Esc several times). If you want to save the new settings,
select Save Settings before you exit. Otherwise, your changes will not be saved.

Using passwords

You can use passwords to provide security for your computer and data. There are
two kinds of passwords: a user password and an administrator password. You do
not have to set a password of either type to use your computer. However, if you
decide to set either one, read the following sections.

User password

The user password feature deters unauthorized persons from gaining access to
your computer.
Chapter 4. Using the IBM Setup Utility program
29