Setting The Start And End Time Function (Main Oven Only); Adjusting The Audible Signal - Baumatic BAO6008-P Instruction Manual

Setting the start and end time function (main oven only)

This function will allow you to set a time in the future that the
oven switches on at and a time that the oven will switch off at.
o Use the main oven thermostat control knob (15) to set the
temperature that you require. The manual operation symbol
(18) will appear on the display.
o Use the main oven function selection knob (13) to select the
mode of cooking that you require.
o Press the "duration" button (6) and the display will show a value
of 00:00. Set the period of time that you wish to cook for, by
using the "minus" (9) and "plus" (10) buttons. The word AUTO
will appear on the timer display.
o Immediately press the "end cook" button (7) and the timer
display will show the value 00:00. Set the time of day that you
want the oven to switch off at, using the "minus" and "plus"
buttons.
o The oven will calculate what time it needs to switch on at, so
that your food will cook for the length of time that you selected.
It will automatically switch itself on, once it reaches the time of
day that it has calculated.
o When the time of day reaches the end of cooking time that you
set, the oven will switch off and an alarm will sound. The word
AUTO will flash and the heating symbol will disappear.
o To silence the audible signal and return the oven to manual
operation mode, once the start and end time function has been
used. To do this you should press the "manual operation" button,
the word AUTO will disappear from the display and the manual
operation symbol will appear instead.
o Important: If you do not turn the thermostat control knob and
oven function selection knob to 0. Then the appliance will
continue to operate as soon as you press the "manual operation"
button.

Adjusting the audible signal

o To adjust the level of the audible signal, when it is sounding,
press the minus button and it will adjust through the 3 sound
levels. Release the minus button and the sound level of the
audible signal will be set.
15