Samsung UN40C7000 User Manual page 67

••••
••••
••••
••••
: Auto
~Move GEnter "JReturn
DNS
. , = ~
Network Setup
~
Internet Protocol Setup : Auto
Samsung's Wireless LAN adapter supports the IEEE 802.11 A, IEEE 802.11 B, IEEE
802.11 G, and IEEE 802.11 N wireless communication protocols. For your 1V to
connect to your network, the wireless router or modem you use must also support
one of these protocols. The fastest of these protocols is IEEE 802.11 N.
Most wireless network systems incorporate a security system that requires devices
that access the network through an access point or AP (typically a wireless modem
or router) to transmit an encrypted security code called an access key.
When connecting Samsung Wireless LAN Adapter to 1V in 802.11 N mode, WEP/
TKIPITKIP-AES is not supported.
You can enjoy photo, music, and movie files stored on a USB device by connecting
it to the 1V and using the Media Play feature. For Media Play operating
instructions, please see
your Owner's Manual.
You can connect your 1V to your LAN through a standard wireless router or
modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN
Adapter" (WIS09ABGN - sold separately) to either the USB 1 (HOD) or USB 2 port
on the back of your 1V. See the illustration below.
The instructions below are for networks that use the Dynamic Host Configuration
Protocol (DHCP) to configure network connections automatically. If your have a
Static IP network, see your user's manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these
steps:
1. Connect your 1V to your network as shown in the illustrations above.
2. Turn on your 1V, press the MENU button on your remote, and the select Setup
-+
Network.
3. Set the Network Type to Wireless if it is not already set to Wireless.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu,
select an AP(Access Point) and
ad hoc network. if you have
selected network with a security
key, the Security Key screen
appears.
6. Enter the security key using the
numbers on the remote, and then
press the Blue button on your
remote.
~
If your network uses WEP
security encryption, 0-9 and A-F will be available on the Security
Key screen. Use the Direction button on your remote to move to the
characters and the enter key to select them.
7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
The Auto acquires and enters the necessary internet values automatically.
8. Select Network Test to check internet connectivity.
~
For more information, see your user's manual.
Network Connection - Wireless
----------_..
__
.....
__
..
_-------------------------------------------------------------------------------------
••••
: Auto
~Move GEnter "JReturn
DNS
N~lw~rk·~
~
••••
••••
••••
To view the On Screen Menus, follow these steps:
1. Turn on your 1V, press the MENU button on your remote, then select
Application
-+
Content View.
2. Press the .... or ~
button to select
Internet@TV, and the
ENTER
~
button.
The USER TERMS
and PRIVACY POLICY
windows appears,
then select Yes.
3. Follow the directions
on your screen to set up Internet@1V. For detailed instructions, see your
Owner's Manual.
~ For best Internet@TV results, your broadband company should provide
sustained download speeds of 3.5 mb/sec or more.
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections.
Home networks that support DHCP
automatically provide the IP address,
subnet mask, gateway, and DNS
values your 1V needs to access the
Internet so you don't have to enter
them manually.
To configure your network connection
for a network that uses DHCP, follow
these steps:
1. Connect your 1V to your network
as shown in one of the illustrations above.
2. Turn on your 1V, press the MENU button on your remote, and then select
Setup
-+
Network.
3. Set the Network Type to Wired if it is not already set to Wired.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
Auto acquires and enters the necessary internet values automatically.
6. Select Network Test to check Internet connectivity.
~
Some networks are Static IP networks. If your network is a Static IP network,
you can not use DHCP to configure the network connection. Instead, you
must enter the IP Address, Subnet Mask, Gateway, and DNS Server
manually. For instructions explaining how to configure a Static IP network,
see your user's manual.
~!~~i_~9_~~~~~~_~.~~J}' _
There are two main ways to connect your 1V to your network using cable,
depending on your network setup. They are illustrated below:
Step 6:
The Internet@TV and Media Play Features
Your TV's Internet@1V feature lets you connect to an ever-expanding portal of your
favorite on-line digital content. Customizable widgets give you access to Blockbuster,
Facebook, YouTube, Flickr, Netflix* and more - all on your HDTV. The Media Play
feature lets you connect to your PC through your home network and stream PC audio
and video files to your HDTV using your remote. To use IPTV or Samsung PC Share
Manager, you must connect your TV to your network. You can attach the 1V to your
network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung
Wireless LAN Adapter. Instructions for both connection methods are below.
Network Connection - Wired
--_
.. _-------------------------------------------------------------------------------------------_.-----------
MEDIA.P: Displays Media Play.
YAHOO!: Runs Yahoo widget.
3D: Sets the 3D mode.
FAV.CH: Displays Favorite Channel Lists on the screen.
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
Displays information on the 1V screen.
Selects the on-screen menu items and changes the values
seen on the menu.
Link to various internet services.
Exits the menu.
Returns to the previous channel.
Displays channel list on the screen.
Changes channels.
Cuts off the sound temporarily.
Change the channels by pressing the Channel button on the remote.
~
If your TV is attached to a cable or satellite box, change the channel using
the box's remote.
~~!~~_~~!~
__
~~~i.~~.P..I_':I_~
_
Auto Motion Plus 240HzTM technology virtually eliminates any blur in video that
include fast motion such as sports and action movies. To activate Auto Motion
Plus, follow these steps:
1. Turn on your 1V, press the MENU button on your remote, then select Picture
Options
-+
Auto Motion Plus 240Hz.
2. Select the Auto Motion Plus 240Hz setting you want.
~
If noise occurs on the screen, please set up the Auto Motion Plus
240Hz to Off. If Auto Motion Plus 240Hz is Custom, you can set up
the Blur Reduction, Judder Reduction or Reset manually.
~ If Auto Motion Plus 240Hz is Demo, you can compare the difference of
on and off modes.
3. Press the RETURN button on your remote when done.
'V
MUTE
r¢
+
II
1 2 3
-II
4 5 6
7 8 9
~
-
WPRE~
I:0~O~
1 2 3
Returns to the previous menu.
Adjusts the volume.
Press to directly access channels.
Brings up the OSD.
Displays the Content View, which includes Channel
List, Internet@TV, Media Play, AIIShare and 3D..
Quickly select frequently used functions.
Buttons used in the Channel list, Internet@TV, Media
Play menu, etc.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to select
channel "54-3", press "54", then press "-" and "3".
Adjust the volume by pressing the Volume button
on the remote.
Use these buttons in Media Play and Anynet+ (HDMI-CEC)
modes. (00: Controls recording on Samsung recorders that
have the Anynet+ feature)
To watch a movie on your Blu-ray player or watch
your favorite 1V show, you must select the correct
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable 1V
input. Sources can be connected to your 1V through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the SOURCE button on your remote. Each time
you press the SOURCE button, you change to a different source.
~~~~~!~~~--~-~~-~~~~------------_._._._--------------------------------------------------.-------
~~~~_s;J}_~9_~~~~~_~_I_~ __ ~~~_~~i~~!~~_s;J __ !~~_y?_I_~~~ . . . _
~
You can also change the channels by pressing the
v
CH
A
button on the front panel of your TV and adjust the volume by pressing the - VOL
+
buttons.
( POWER ON/OFF
1
Turns the 1V on and off.
---11- 0
~O~CE
Q - - -
Turns the remote control light on or off. When on, the
Displays and selects the available video sources. buttons become illuminated for a moment when pressed.
(Using the remote control with this button set to off will
reduce the battery usage time.)
yi_~~.i_~9_!_~_~_g_~_~£_~~~~_~_~~~~ _
To view the On Screen Menus, follow these steps:
I I I I
1. Turn on your 1V, press the MENU button on your
CONTOO? Imr
ET
remote. The main menu appears. [ ] .
T02LS ... IN,FO
The menu's left side has the following menu ""
options: Picture, Sound, Channel, Setup, Input, Application, and Support.
2. Press the. or T button on your remote to select a menu option, and then
press the
ENTER~
button.
3. When done using the menu, press the EXIT button on your remote to exit.
Remote Control Buttons and Functions