Safety; Installing The Cisco Sfs 3504 Server Switch - Cisco SFS 3504 Hardware Installation Manual

Multifabric server switch

Hide thumbs Also See for SFS 3504:

Table of Contents

This chapter describes how to mount your Cisco SFS 3504 Server Switch on a rack, boot the

Cisco SFS 3504 Server Switch, and configure basic services. For advanced configuration information,

see the Cisco SFS InfiniBand Software Configuration Guide or the Cisco SFS Product Family Element

Manager User Guide.

This chapter includes the following sections:

•

Safety

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly

Warning

touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

Warning

Voltage is present on the backplane when the system is operating. To reduce risk of an electric shock,

keep hands and fingers out of the power supply bays and backplane areas. Statement 166

Read the installation instructions before connecting the system to the power source. Statement 1004

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be

Warning

accessed only through the use of a special tool, lock and key, or other means of security.

Statement 1017

OL-14325-01

Safety, page 3-1

C H A P T E R

Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide

3-1

Table of Contents