Baja motorsports BR150-D Owner's Manual page 31

BATTERY INSTALLATION
BATTERY INSTALLATION
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the
red positive (+) pole of the battery.
(see figure 24)
2. Connect the black negative (-) cable to the
black negative (-) pole of the battery. (see
figure 25)
Note: The red positive (+) cable has a
larger diameter than the black negative y
cable.
3. Charging rate: Charge battery @ 0.7 Amps
for 5 ~ 10 hours.
• After charging is complete, install
securely all six battery caps (see
figure 26)
• Install battery into battery tray located
behind seat (see figure 27).
• Once battery is firmly seated in tray,
attach red positive (+) wire to positive
(+) terminal on battery, then attach black
negative (-) wire to negative (-) terminal
on battery (see figure 27)
• Attach cover over battery using rubber
strap provided (see figure 28)
WARNING
NEVER REMOVE THE STRIP OF CAPS
NOR ADD ANY WATER OR ELECTROLYTE.
Rubber strap
28
Figure 24
Figure 25
Figure 26
Figure 27
Cover
Figure 28