Baja motorsports BR150-D Owner's Manual page 30

BATTERY INSTALLATION
Preparing the battery:
· Place battery on level surface. Remove cap
strip from top of battery. (see figure 20)
. Wear eye protection and rubber gloves for
this step. Once battery strip is removed,
locate electrolyte in bottle and place over the
six openings. Press firmly down on bottle
allowing the battery to pierce the six in-line
openings in bottle. Let electrolyte drain into
battery until bottle is completely empty. (see
figure 21)
· Discard empty electrolyte container in a waste
area that is inaccessible to children and
animals.
· After filling let battery stand for at least 30
minutes before charging. This allows the
electrolyte to penetrate plates for optimum
performance and ensures longer battery life.
· After 30 minutes the battery is ready for its
initial charge. Place caps loosely over battery
cell holes (see figure 22)
27
Figure 20
Figure 21
Figure 22