Setup Menu - Pioneer DEH-4400BT Operation Manual

Operating this unit
Indicator State
! Tuner: band and frequency
! RDS: program service name,
PTY information and other lit-
Main dis-
eral information
1
play sec-
! Built-in CD, USB storage de-
tion
vice and iPod: elapsed play-
back time and text
information
The list function is being oper-
2
(list)
ated.
(iPod This unit's iPod function is oper-
3
control) ated from your iPod.
4
LOC Local seek tuning is on.
5
(TA) TA function is on.
6
(TP) A TP station is tuned in.
7
(repeat) Track or folder repeat is on.
Random play is on.
(ran-
The iPod source is selected and
8
dom/shuf-
the shuffle or shuffle all function
fle)
is on.
(auto Shows when the automatic an-
9
answer) swering function is on.
Connected to a Bluetooth device.
a
(Bluetooth
The line is on hold.
indicator)
The sound retriever function is
b
(sound re-
on.
triever)
Set up menu
When you turn the ignition switch to ON after
installation, set up menu appears on the dis-
play.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES. Press M.C.
to select.
# If you do not operate for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn
M.C. to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Perform the following procedures to
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek tun-
ing is 50 kHz. When AF or TA is on, the tuning step
automatically changes to 100 kHz. It may be prefer-
able to set the tuning step to 50 kHz when AF is on.
! The tuning step remains at 50 kHz during manual
tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display to on or off.
2 Press M.C. to confirm the selection.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
! If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
! Some characters may not be displayed properly.
1 Turn M.C. to select the desired setting.
EUR (European)—RUS (Russian)
2 Press M.C. to confirm the selection.
QUIT appears.
Autogood products «130»
Section
02
5
En