Call From The Call List; Call List Entry; Call From The Redial List; Out Of Range Warning - VTech VT1301 User Manual

4.2.5

call from the call list

. In idle, press p
or
MENU
Press then to select call lIsT. Press
OK
NOTE
The first entry in the call list will be displayed. If there is no entry in the call list, it will
show "eMpTy".
MENU
2. Press then
OK
TalK
3. Press to dial the number.
4.2.6

call list entry

TalK
Press to dial out to the selected Call List entry. Alternatively, press
the Call List from the main menu.
4.2.7

call from the redial list

. Press q to access the redial list and press
number.
TalK
2. Press to dial out to the selected redial number.
4.2.8

out of range Warning

When the handset goes out of range of the base, the screen will display "oUT of
ranGe", and the call will be disconnected if you are on a call. When you move back
within range, the handset will automatically reconnect to the base.
4.3

answer a call

If the handset is not on the charging cradle:
When the phone rings, press
If the handset is on the base or charger and if aUTo ansWer is set to on:
When the phone rings, pick up the handset to answer a call.
If you wish to switch aUTo ansWer Off, see page 26. The default setting is on.
4.4

adjust earpiece and speakerphone Volume

There are 5 levels (VolUMe 1 to VolUMe 5) to choose from for each of earpiece
and speakerphone volume.
During a call:
p q
Press to select from VolUMe 1 to VolUMe 5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
to access the call list and press
p q
to select desired call list.
TalK
/ to answer a call.
HS
p q
to select.
MENU
.
OK
p q
to select the desired redial
5
MENU
to access
OK