LG GCE-8160B Owner's Manual page 10

DirectCD TM v2.5b(s)
Connecting
the Power
Connector
Connecting
the
Interface
Connector
Connecting
the Sound
Card
Connect the power cable from the computer's power supply to the socket
on the drive unit, fitting the connector firmly into the power in connector.
If there is no spare power cable available in the computer, you will have
to purchase a splitter cable of a suitable type.
Beveled edge up
NOTE : Improper connection may damage the drive and void the warranty.
Generally, the Power connector can only fit one way.
Connect the 40 pin IDE cable to the back of the CD-R/RW Drive,
making sure the coloured (red) stripe on the IDE cable is connected
to pin 1 on the CD-R/RW drive. Pin 1 is closest to the Power
Connector.
NOTE : Generally, the IDE connector is keyed and will only fit one way.
If the computer is using a sound card, the drive is connected to the
sound card with an audio cable. The supplied analog audio cable fits
most sound cards or one can be purchased at a local computer store.
Refer to the manual for the sound card for detailed
information regarding connection.
7
Red-edge
DIGITAL ANALOG
INTERFACE
AUDIO AUDIO
C S M
39
D G R G L
S L A
40
L R
Sound card
POWER
+5 GND +12
Pin1
POWER
1 +5 GND +12
2
marking L-R