Fault Finding - Glow-worm Ultracom 24cxi Instructions For Use Manual

UW APPARAAT GEBRUIKEN HOW TO OPERATE YOUR APPLIANCE CÓMO UTILIZAR SU APARATO AKO POUŽÍVAŤ ZARIADENIE COME USARE L'APPARECCHIO HOW TO USE YOUR APPLIANCE HOW TO USE YOUR APPLIANCE COME USARE L'APPARECCHIO UW APPARAAT GEBRUIKEN COMMENT UTILISER VOTRE APPAREIL COMMENT UTILISER VOTRE APPAREIL
GEBRAUCHSANLEITUNG FÜR IHR GERÄT
Preheat function
• Press simultaneously on the buttons
and of mode
deactivate the preheat function.
- If is displayed,
the preheat is deactivated.
- If is not displayed, the preheat is
activated.
NOTE: If a Glow-worm intelligent controls
are fitted, then the timed period for
preheat can be changed, but only if it is
activated.
Adjustment for the water temperature
in the heating circuit
• Press the buttons
function to adjust the temperature of
the water in the heating circuit.
Temperature of the water
min.
recommended
max. Pre-set by the installer
NOTE: If a Glow-worm outdoor sensor or
Glow-worm intelligent controls are fitted,
the temperature of the water in the heating
circuit is calculated by the boiler. It is
neither necessary nor possible to adjust it
manually.
- 12 -
to activate or
or of the
(°C)
10
50
ANY ASSISTANCE?
9 Fault Finding
In this section fault codes that are
displayed, which CAN be carried out by
the USER to restore appliance operation
(Corrective action: ...). Other fault codes
MUST be solved by a competent person
only.
Like all condensing boilers
i
it will produce a plume of
condensation from the flue
terminal in cool weather.
This is due to the high
efficiency and hence low flue
gas temperature of the boiler.
It is normal and not a fault
indication.
• If after carrying out this basic advice
and your appliance still does not work,
leave it turned off and contact your
competent person.
0020085232_01 - 03/10 - Saunier Duval 0020085232_01 - 03/10 - Glow-worm 0020085232_01 - 03/10 - Hermann 0020085232_01 - 03/10 - Protherm 0020085232_01 - 03/10 - Bulex 0020085232_01 - 03/10 - AWB