Maintenance And Storage - EarthQuake 3365B Operator's Manual

mAINTENANCE ANd STORAGE

mAINTENANCE SCHEdUlE
Your rototiller has been designed and produced by the industry's leading manufacturer of outdoor power equipment to provide you with
years of reliable operation.
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
maintenance Operation
Check belt tension
Change forward belt
Engine maintenance
Check oil level/change oil
Clean tine axle shaft
Lubrication
Check throttle control adjustment
Em = See engine manual
1 Adjust throttle control after first three hours of operation or if engine is hard to start or run-on occurs.
2 Change oil after the first five to eight hours of use, then after every 50 hours or every season. Change oil every 25
hours when operating under heavy load or in high temperatures.
SERVICING THE ROTOTIllER
The following information will help you make the necessary checks
and perform the procedures required to follow the normal care
recommendations made for your rototiller unit.
If you prefer, your local authorized dealer can make these checks and
perform the required procedures for you.
Important: Use only approved Ardisam spare parts
12
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST
OPERATOR INSTRUCTIONS ANd PARTS
Before
Page
Each Use
13 X
13
14 X
14 X
14 X
14
-
!
WARNING
To prevent accidental starting:
Engine must be turned off and cool, and spark plug wire
must be removed and secured from spark plug before
checking and adjusting engine or equipment.
Front Tine Models 3365 Series
50 hours or
Every Season
X
X
2
X
1