Water Cooler Connections; Figure 4. Water Cooler Connections - Global Water G5 Operation Manual

Water Cooler Connections

When you receive the water cooler, the water connections on
the back have of the cooler have tube plugs in them. These tube
sections must be removed before making all your connections. To
remove the tube sections see figure 7 "Disconnect". The 1/4" plastic
tubing should be used for making the Feed Water and Drain
connections. If hard copper tubing is used for the Feed Water and
Drain connections the bulkhead fittings must be changed to a metal
fitting.

Figure 4. Water Cooler Connections

11 | P a g e