Table of Contents
Advertisement
v System restart
To determine how a specific property is updated, refer to the Update Method
column in the Connector Configurator window, or see the Update Method column
in Table 15 on page 85.
There are three locations in which a standard property can reside. Some properties
can reside in more than one location.
v ReposController
v ReposAgent
v LocalConfig
Standard properties quick-reference
Table 15 provides a quick-reference to the standard connector configuration
properties. Not all connectors require all of these properties, and property settings
may differ from integration broker to integration broker.
See the section following the table for a description of each property.
Note: In the Notes column in Table 15, the phrase "RepositoryDirectory is set to
Table 15. Summary of standard configuration properties
Property name
AdapterHelpName
AdminInQueue
AdminOutQueue
The new value takes effect only after you stop and restart the connector agent
and the server.
The property resides in the connector controller and is effective only there. If
you change the value on the agent side, it does not affect the controller.
The property resides in the agent and is effective only there. A local
configuration can override this value, depending on the property.
The property resides in the configuration file for the connector and can act only
through the configuration file. The controller cannot change the value of the
property, and is not aware of changes made to the configuration file unless the
system is redeployed to update the controller explicitly.
<REMOTE>" indicates that the broker is InterChange Server. When the
broker is WMQI or WAS, the repository directory is set to
<ProductDir>\repository
Possible values
One of the valid
subdirectories in
<ProductDir>\bin\Data
\App\Help\ that
contains a valid
<RegionalSetting>
directory
Valid JMS queue name
Valid JMS queue name
Update
Default value
method
Template name, if valid,
Component
or blank field
restart
Component
<CONNECTORNAME>
/ADMININQUEUE
restart
Component
<CONNECTORNAME>
/ADMINOUTQUEUE
restart
Appendix A. Standard configuration properties for connectors
Notes
Supported regional
settings.
Include chs_chn,
cht_twn, deu_deu,
esn_esp, fra_fra,
ita_ita, jpn_jpn,
kor_kor, ptb_bra,
and enu_usa (default).
This property is valid
only when the value
of DeliveryTransport
is JMS
This property is valid
only when the value
of DeliveryTransport
is JMS
85
Advertisement
Table of Contents
