Creating A New Configuration File - IBM 4.6.x User Manual

v Queue names may not have leading or embedded spaces.

Creating a new configuration file

When you create a new configuration file, you must name it and select an
integration broker.
You also select an operating system for extended validation on the file. The toolbar
has a droplist called Target System that allows you to select the target operating
system for extended validation of the properties. The available options are:
Windows, UNIX, Other (if not Windows or UNIX), and None-no extended
validation (switches off extended validation). The default on startup is Windows.
To start Connector Configurator:
v In the System Manager window, select Connector Configurator from the Tools
v In stand-alone mode, launch Connector Configurator.
To set the operating system for extended validation of the configuration file:
v Pull down the Target System: droplist on the menu bar.
v Select the operating system you are running on.
Then select File>New>Connector Configuration. In the New Connector window,
enter the name of the new connector.
You also need to select an integration broker. The broker you select determines the
properties that will appear in the configuration file. To select a broker:
v In the Integration Broker field, select ICS, WebSphere Message Brokers or WAS
v Complete the remaining fields in the New Connector window, as described later
Creating a configuration file from a connector-specific
template
Once a connector-specific template has been created, you can use it to create a
configuration file:
1. Set the operating system for extended validation of the configuration file using
2. Click File>New>Connector Configuration.
3. The New Connector dialog box appears, with the following fields:
24
Adapter for Siebel eBusiness Applications User Guide
menu. Connector Configurator opens.
connectivity.
in this chapter.
the Target System: droplist on the menu bar (see "Creating a new configuration
file" above).
v Name
Enter the name of the connector. Names are case-sensitive. The name you
enter must be unique, and must be consistent with the file name for a
connector that is installed on the system.
Important: Connector Configurator does not check the spelling of the name
that you enter. You must ensure that the name is correct.
v System Connectivity
Click ICS or WebSphere Message Brokers or WAS.
v Select Connector-Specific Property Template