Purpose; Fcc Notice; Emc Conformance - Raymarine Ray240 User Manual

4

Purpose

This handbook contains important information on the installation, operation and
maintenance of the US and European versions of the Ray240 VHF radio, which is
intended for light marine use and covers the following models:
•E42001 Ray240 System - US and Canadian version.
•E42002 Ray240E System - European version.
To get the best results in operation and performance, please take the time to read
this handbook thoroughly.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications to this equipment, not expressly approved in writing by
Raymarine Inc., could violate compliance with FCC rules and void the operator's
authority to operate the equipment.

EMC conformance

All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility (EMC)
standards, but correct installation is required to ensure that performance is not
compromised.
Antenna mounting and EME exposure
Ensure that the antenna is connected to the radio before transmitting.
Raymarine declares a Maximum Permissible Exposure (MPE) radius of 1.5 meters
(per OET Bulletin 65) for this system, assuming 25 watts output to an
omnidirectional antenna of 3dBi gain or less.
For watercraft with suitable structures, the antenna base must be at least 3.5
meters above the main deck to meet the MPE for persons up to 2 meters tall. For
watercraft without such structures, the antenna must be mounted so that its base
is a minimum of 1.5 meters vertically from the heads of all persons.