Raymarine Ray240 User Manual page 18

14
Which menu do I need?
Main Menu
Intercom/Hailer/Fog
Phone book
VHF Operations
DSC Operations
ATIS
Settings
System Information
Notes: (1) A Maritime Mobile Service Identity (MMSI) number is required to operate
1
2
DSC functions.
(2) ATIS function only available on European models. An Automatic
Transmission Identification System (ATIS) number is required to operate.
ATIS enable/disable is not applicable to units restricted to Marcom-C
operation.
(3) ATIS Enabled - transmit power is limited to 1W on Channels 6, 8, 10, 11, 12,
13, 14, 15, 17, 71, 72, 74, 75 76 and 77 in accordance with regulations for
European Inland Waterways.
(4) ATIS Disabled - transmit power restrictions are disabled for use at sea. DO
NOT use this mode when operating on European Inland Waterways.
Intercom
Hailer
Auto
Foghorn
Manual
Add new entry
Select name from list
Clear Memory
Radio Sensitivity
Frequency Group
Call
Call All Ships
Call log
Position
Position Request
Settings
ATIS Information
ATIS Enable / Disable
Backlighting
Key beep
Show GPS data
Software
Hardware
Call
Position request
View
Delete
Distant
Local
USA
Canada
International
Urgency
Safety
My MMSI Group
My MMSI
ATIS Information
ATIS Mode 3 & 4