Table of Contents
Advertisement
Radio frequency
Speaker volume
GETTING STARTED
A. CONNECTING TO MAINS POWER
1. Remove the cover at the bottom of the unit.
2. Insert the adaptor cable into the power adaptor DC jack
3. Plug the adaptor to a mains socket.
4. Take out the insulating film in the battery slot.
5. Return the cover back on the unit
B. SET CLOCK
1. Press "
" once to enter the set clock mode.
2. Press "+" or "-" to select 12 or 24 hour format. Press the "
3. Press, or Press and Hold "+" or "-" to adjust the time. Press the "
automatically to the smart phone if the smart phone with affiliated app installed)
C. FIRST USE OF THE REMOTE CONTROL
1. Turn the battery compartment cover of the remote control anti-clockwise to remove the cover.
2. Remove the insulating film in the battery slot and then replace the cover to the base of the remote control.
IMPORTANT Take out the insulating film
For your first use, pull out the insulating films, otherwise the remote control does NOT work.
1.
2.
" button to confirm.
" button to confirm. (the clock could be synchroized
1.
3.
2.
4.
Advertisement
Table of Contents
