Oregon Scientific WL201 User Manual page 8

b. Press " " to confirm the Wakeup Light option and exit the alarm setting mode.
c. Press " " to confirm.
4. Turning ON / OFF the alarm
When the unit is in the clock mode, press "
The LCD display will respond accordingly:
Wait 2 seconds to go back to the clock mode. When the alarm setup is toggled, the corresponding icon will show on the LCD
display in the clock mode.
Press " " to confirm.
ALARM STOP / SNOOZE
1. To stop the alarm, put you hand through the unit and hold for 1 second.
2. Press any keys on the remote control to snooze the alarm. The selected alarm sound / radio and the Wakeup Light (if
selected) will be toggled on again after 8 mins. (the alarm sound / radio and the Wakeup Light (if selected) flashes during
snooze.
TURN ON/OFF THE MUSIC
SPEAKER
For Android device, music could be played via 3.5mm audio jack only.
For iPhone, iPad and iPod device, music could be played either 3.5mm audio jack or USB.
1. Open the jack cover at the side of the unit.
2. Connect the USB for digital connection or 3.5mm jack for audio to your smart device. For the iOS device connected, smart
phone icon " " will show on the LCD display.
3. Operate your music player of your device to start the music.
" once and then press "
Alarm on Alarm and Wakeup Light on
" or " " to toggle the alarm setup on / off.
Alarm and Wakeup Light off