Setting The Clock And Calendar; Clock Manually - Oregon Scientific RM932A User Manual

SETTING THE CLOCK AND CALENDAR

CLOCK MANUALLY

1. Press and hold [MODE] button for 2 seconds.
2. Use the [ROTARY KNOB] to scroll through Pacific, Mountain,
Central, Eastern, or ADD. Press [MODE] to confirm.
3. Add is selected, the World-time city will be flashing. Use
[ROTARY KNOB] to select the city.
4. Repeat the same procedures to set the hours, minutes, year, month,
day, language of day-of-week and hourly-chime on/off by using
[ROTARY KNOB] button.
5. Press [MODE] button to save the changes and exit.
6. For the language for day-of-week, you can select "E" for English,
"D" for German, "F" for French, "I" for Italian or "S" for Spanish.
The day-of-week can be expressed as an abbreviation in five
different languages. The languages and their selected
abbreviations for each day of the week are shown in the language
chart below.
RM932A GB
Language
Note: When changes are made to the minute, the seconds will start
from zero. The unit will also save all changes and return to normal
display automatically after the unit has been left idle for
approximately one minute.
ABOUT THE HOURLY-CHIME FUNCTION
When the Hourly-Chime is set to the on-mode, the indicator [
will light up and a beep sound will be given out at the beginning of
each hour.
5
Day-of-the-week
4/4/03, 11:10 AM
]