Set Sleep Timer; Select Daylight Saving Time (Dst) Mode; Adjust Display Brightness - Philips AJH5100 User Manual

The five prestored sounds are listed below:
n1
Bell
n2
Jungle
n3 Bird
n4
Wake music 1
n5
Wake music 2
Activate/deactivate the alarm timer
Press ALARM repeatedly.
» The alarm icon appears if the alarm timer is
on and disappears if it is off.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.
15 30 60
OFF
EN
9
90 120
Select daylight saving time
(DST) mode
For countries with daylight saving time (DST),
the clock radio offers you DST option to adjust
summer time.
In standby mode, press and hold 12/24H·DST
for two seconds.
» The clock advances by one hour.
Note
•
To exit DST mode, repeat the above operation.

Adjust display brightness

Press BRIGHTNESS repeatedly to select
different brightness levels: high, mid, and low.