extronics iCAM500 Operating Manual page 6

iCAM500 Operating Manual Issue 9
Important:- Read the manual completely and carefully before operation. Only the
latest documentation is valid.
Important:- Installation, maintenance and cleaning of the units must only be
performed by persons trained and authorized for this purpose, insofar as they are
familiar with the units.
Important:- If it can be assumed that safe operation is no longer possible, switch off
the unit and secure it against being used again.
Important:- It is prohibited for the operator to open the units in a way that is not
described in this manual. This may only be done by specifically authorized personnel
of Extronics Ltd.
Important:- Modifications and conversions to the units are not permissible and will
cause the Ex protection and the guarantee to become void.
Extronics Ltd is not liable for any consequential damage.
Important:- The technical data specified for hazardous areas comply with the values
certified in the European EEx approval. The user bears the sole responsibility of
examining the equipment with regard to its suitability for the intended application and
environmental conditions. Extronics Ltd accepts no liability for any lack of suitability.
Important:- For installation, maintenance and cleaning of the units, it is important to
observe the applicable standards and provisions concerned with explosion protection
(VEN 60079-14, EN 50014 - 50039) as well as the Accident Prevention Regulations
and codes of practice in your region.
Important:- Clean with a soft cloth or brush. There are small gaps and holes in the
case, so do not use a fluid cleansing agent. Do not clean in the hazardous areas
because of potential static charging of the cleaning tool
6