Removing Icam500 From Your Pc - extronics iCAM500 Operating Manual

iCAM500 Operating Manual Issue 9
3.7.3 Windows ME / 2000 / XP
For these three operating systems, NO Driver is required, because Windows has a
built-in driver to support the iCAM500's USB removable disk.
Simply plug iCAM500 into the USB port and it will be recognized by the system. The
operating system will setup iCAM500 automatically without any need for a driver.
Once the installation is complete, you will see a "Removable Disk" drive in "My
Computer".
3.7.4 Mac OS 9.x or above
No driver is required for these operating systems. Simply plug the iCAM500 into the
USB port and the system will automatically find iCAM500.

3.8 Removing iCAM500 From Your PC

Please remove your iCAM500 via one of the following methods. Incorrect removal of
iCAM500 may result in data lost.
3.8.1 Windows 98/98SE
You could unplug iCAM500 from the USB port directly once the LED stops blinking
and dimmed. The "Removable Disk" icon will disappear automatically.
3.8.2 Windows Me/2000/XP
Click the icon at the lower right hand corner, and a "Stop USB Mass Storage Device-
Drive (X:)" message will appear. Click the message to stop the device.
Click "OK" to confirm, then wait till the LED dimmed before removing from USB port.
3.8.3 Mac OS 9.x or above
Drag the "Removable Disk" icon to "Recycle Bin", wait till the LED dimmed before
removing from USB port.
13