extronics iCAM 50 Series Quick Start Manual

lights flash
IN SEQUENCE
right to left
ure
Picture quality
e
Picture quality is indicated by the LEDs (below). All
l
pictures are stored as occasionally conditions mean
it is not possible to get a perfect picture and a poor
one is better than no picture. However it is strongly
recommended that another picture is taken.
All three
lights flash
TOGETHER
The three
lights flash
IN SEQUENCE
ture
right to left
ee
R
will

Using the flash

Press the flash button
and the red LED will start
to flash. The LED will
become solid indicating
the flash is ready for use.
The green LED flashing
slowly indicates low battery.
Once enabled - the flash
function is automatic i.e.will
only operate in low light
conditions
Bad Picture
To indicate a bad picture
Voice record function
has been taken, the three
lights flash IN SEQUENCE
Allows a voice message
three times from right to
to be associated
left ie. red, blue, green,
with a picture. Press
red, blue, green and red,
record button - blue
blue, green.
LED indicates feature
enabled. Take a picture
in the usual way but
CONTINUE to hold the
Good picture
picture button.
To indicate a
good picture has
Good Picture When the blue light
been taken, all
flashes, record your
To indicate a good picture
three lights flash
message and release
TOGETHER three has been taken, all three
picture button when
times and you will
lights flash TOGETHER
finished.
hear a beep
three times and you will
hear a beep.

Downloading pictures

Bad picture
Simply turn on the iCAM501U, connect the
Bad Picture
To indicate a bad
USB cable to a Windows 7 /Vista or XP PC and
picture, the three
follow the on-screen instructions.
To indicate a bad picture
lights flash IN
has been taken, the three
SEQUENCE three
lights flash IN SEQUENCE
times from right to
three times from right to
left i.e. red, blue,
left ie. red, blue, green,
green etc.
red, blue, green and red,
blue, green.
ON OFF
FLASH RECORD
The three
Bad Picture
ON OFF
lights flash
IN SEQUENCE
To indicate a bad picture
FLASH RECORD
right to left
has been taken, the three
lights flash IN SEQUENCE
three times from right to
left ie. red, blue, green,
red, blue, green and red,
blue, green.
Plug into
any PC
via the
USB port
Vision Technologies
iCAM 50x
Quick Start Guide
This quick start guide
explains how to use
the camera and its
various functions. For
Safety Instructions
please refer to
instructions enclosed
with your iCAM50x.
Package Contents
• iCAM50x camera
• Safety Instructions
• Two approved AA batteries
• Internal USB lead
• 1 lanyard
Tel +44 (0)845 277 5000
www.extronics.com