DAGE-MTI CCD-100 User Manual page 5

The
CCD-100
InvestiGater or independently. Figure 1 shows the
independently. Attach the power supply to the
connector on the
BNC is available for viewing with a monitor.
Figure 2 shows the
remote control. The
now made at the
, connect the
GATE
Figure 3 shows the
InvestiGater. A standard S-video cable, Dage P/N 737980-
01, provides video and the gate pulse between the InvestI-
Gater and the
provides power for both the
therefore do not use the
video of the Dage InvestiGater is available for viewing with
a monitor or for digitization by a computer.
A lens or microscope can be attached to the front of the
. The camera is supplied with a removable C-mount
CCD-100
adapter. If a CS lens is to be used, the C-mount adapter
should be removed. Be sure not to remove the C-mount
adapter when unscrewing a lens or microscope from the
camera. The camera has an adjustable back focus that can be
changed through the use of a flat bladed screwdriver. The
adjustment is located on the top of the camera at the front.
Simply use the screwdriver to provide the correct back focus.
To achieve a picture, place the camera in the
and
BLACK AUTO GAIN
camera will be able to provide an acceptable image regardless
of light level.
can function in tandem with the Dage
. Video output from the
CCD-100
CCD-100
POWER
and two cables,
RC-100
RC-100
CCD-100
. The InvestiGater's power supply
CCD-100
CCD-100
positions. This will ensure that the
with the optional
and
VIDEO
to the
CCD-100
connected with the Dage
and the InvestiGater,
CCD-100L
's power supply. The output
CCD-100
POWER
VIDEO
RC-100
interconnects are
and
REMOTE
.
AUTO